Measure and calibrate output performance more accurately with up to 0.01% accuracy

Wider range and output capacity

Voltage input protection circuit, more robust circuit design to ensure the stability of measurement

With the integrated pressure off test, you can capture the key values of the switch's trigger, reset, and dead-zone pressure switch test

More robust and reliable circuit design and circuit protection

Two independent channels; allows simultaneous measurement, output, and viewing of process signals

Measure voltage, milliamps, RTDs, thermocouples, frequency, pulses, and resistance to test sensors and transmitters

Output/analog voltage, milliamps, thermocouples, RTDs, frequency, pulses, and pressure signals to calibrate transmitters

Measure or output pressure with any of the 48 Fluke 750Pxx pressure modules*

Perform valve and I/P testing using a milliamp signal output using synchronized pressure measurements

The integrated pressure shut-off test allows you to capture switch settings, resets, and dead zones

The memory can store up to 8 calibration results and return the stored calibration data from the field for future analysis

Transmitter error rate calculation and ability to interpret calibration results without the help of a calculator

Perform fast, linear testing using the Auto Step and Auto Ramp features

During the test, a 24 V loop power supply was used to power the transmitter while taking a milliampere measurement

Store commonly used test settings for future use

Frequency accumulator and frequency pulse train output modes enable enhanced flowmeter testing

HART mode inserts a 250 ohm resistor into the milliamp measurement and output to be compatible with HART instruments

Customize RTD curves, add calibration constants to certified RTD probes for increased temperature measurements.

New voltage input protection design improves reliability

Three-year warranty

*Pressure pump required